|
Even if your home was in pristine condition when you moved in,
you may want to change some things so that will reflect your own tastes and
personality. One of the easiest ways to make a dramatic difference is with
paint. While some difficult areas or fancy techniques are better left to
professionals, interior painting is a great do-it-yourself project.
Here are a few simple steps that can make the job go quicker and
get better results. I wish you luck with your next project.
QUICK TIPS FOR
INTERIOR PAINTING
-
Before you begin pick your paint colors carefully. You may
love one color, but will it go well with your furnishings, carpeting, and
adjoining wall areas? Choosing with care can save you a frustrating and
costly re-do.
-
Use water based latex paint for ease in application and
clean-up.
-
Buy the correct paint for the surface you are painting. Wood
floors, concrete, masonry or metal require specific products.
-
Before you dip your brush in that paint, assemble every item
you will need:
-
Enough paint for the entire
job (you don’t want to take your paint smeared self back to the store in the
middle of the job).
-
Brushes, rollers (if you
settle for the cheapest quality you’ll get brush hairs and roller fuzzies
all over your walls!)
-
Plastic dropcloths or old
sheets (yes, you will make a mess)
-
A large damp cloth for
wiping up small drips and mistakes while they are still wet
-
Stepladder
-
Screwdriver and claw hammer
to remove wall hooks, switchplates, nails, etc.
-
Plastic automotive tape to
edge windows, trim and carpet.
-
Hand cream—you will be so
glad you used this on your hands and arms when it comes time to clean up.
-
Prepare the surface. Cracks and holes should be filled with
spackling and old paint should be lightly sanded so the new paint will
adhere. Make sure the surface is clean of dirt, grease, rust and flaking
paint.
-
Paint in this order: ceiling, walls, trim, floor. Remember,
paint drips DOWN.
-
Use a roller for the big areas and a brush to cut in from the
outside edges.
-
Tape all window edges, trim, and carpet edges. You will thank
yourself for this once you start cutting in with the brush!
|